Preparing An Organic Carpet Cleaning Solution

Preparing An Organic Carpet Cleaning Solution

Many home owners want to keep their house’s interior fresh and vibrant at all times of the year. In some cases, you may not want to use a store-bought carpet cleaning solution, because it may have lingering chemicals, toxins, or other potentially hazardous products that could affect you and your family’s health, let alone they may have lasting residue or weaken your carpet’s fabrics over time. In these cases, you may want to purchase an organic, green carpet cleaning service through an eco-friendly company such as Kasandjo’s Chem-Dry, who uses a carpet cleaning product called The Natural, that is made from ingredients that won’t harm your home or health.

Carpet Cleaning Post 2

If you decide to take the do it yourself route, and want to create your own organic cleaning product, there are some general tips and guidelines you can follow, along with some minor tweaks and edits to personalize your product exactly how you like it. Most homemade carpet cleaning products utilize a combination of a mild dish detergent, such as Dawn or Dial, along with a cleaning product such as distilled white vinegar (NOT apple cider vinegar, because the coloring of the product can cause further staining and damage to your carpet’s fabrics), along with some water to create a great, non-toxic solution.

The rule of thumb for mixing a fabric cleaning product is half water, a few drops of dish detergent, about a cup or so of distilled white vinegar, and 10-20 drops of your favorite essential oil. The last part is up to you, some individuals prefer not to have a scent from the product, while others may want to mix and match scents to create a pleasing aroma. A personal favorite is to include about 5-10 drops of lavender essential oils with a few drops of rosemary essential oils. This creates a pleasing, relaxing, not too pungent smell that is perfect for fabric cleaning. You can store this homemade cleaning solution in a variety of plastic or glass spray bottles, just make sure that the plastic is BPA-free to avoid any potential chemicals leaking into the solution.

Carpet Cleaning Post 1

Creating your own fabric cleaning solution rather than going through a company or renting out a steam cleaner and solution from a major department store can be an easy way to save some money on your spring cleaning. A typical steam cleaner, along with its solution, can run over $100 for just a single clean. The average cost of filling up a spray bottle of your homemade solution? Around $1.00. This cost of course goes down if you happen to make your cleaning solutions in bulk. For the most part, this recipe of water + vinegar + soap + essential oils is used for a variety of cleaning products, on both fabrics, tiles, grout, wood, and other surfaces. One easy way to differentiate between different scents or cleaning products is to use a label maker for the bottles, or put in a single drop or two of a food coloring solution, so that the products are different colors. If you decide to use food coloring, only put a drop or two – too much of the coloring can cause additional staining or problems to arise.

Removing Tough Stains Easily

Everyone has been there at one point: you’re hanging out in your kitchen, making dinner for the family, when you hear something spill in the living room. You run over, only to see that your child has knocked over his entire cup of grape juice, right onto your fairly new, light-colored carpeting. The natural instinct in most of these cases is to panic, and immediately start rubbing the stain and putting whatever you have access to into the spot in an attempt at removing it. In most cases, this is NOT what you want to do! It’s important that you take the proper steps to remove tough stains before they soil and fully soak into your carpet’s fabric and fibers. Some of the most common stains that are hard to treat include blood, jellies and jams, juice, wine, and the ever-present red clay that can be tracked in on shoes.

When a spill occurs, it’s vital that you do your best to take care of it as promptly as possible. The best option for a new stain is to immediately grab a towel, soak it in water, and very gently blot the stain. This will remove the majority of liquid from the area, allowing you to fully clean whatever has happened to soak in already. Once you are able to get rid of most of the liquid, you can then focus on actually cleaning and removing the stain. For most people, they prefer to buy a solution from the store that is effective at removing carpet stains. This can be an easy, cheap solution in most cases. However, if you want something a little more natural for your home, you may want to go the frugal route and create your own cleaning solution! You can make this easily with a bottle of white vinegar, mixed with water and a few drops of essential oil. This is a non-toxic, all-natural product that can clean most tough stains if taken care of in a timely manner.

In some cases, you may require a more serious clean, such as instances where the juice has had some time to penetrate, or where there is a larger stain that covers most of a carpet or rug. In these cases, you may possibly want to think about heading to your local Home Depot or Lowe’s and renting a carpet steam cleaner. They are fairly inexpensive, and can be used on an hourly or daily basis. More often than not, they come with everything you need as well, to make the process as simple as possible.

If you prefer to let the professionals handle the mess, it may be a better idea to choose a carpet cleaning company that is local to your area, such as TNT Chem-Dry, to take care of the problem for you. These companies specialize in tough stains and worn, older fabrics. I prefer using a chem-dry carpet cleaning franchise because they are one of the few national companies that utilize a non-toxic, all-natural carpet cleaning solution. This puts my mind at ease as I know that after the process is complete, my family won’t have any potentially harmful fumes or residue remaining on the carpet’s fibers.

3 DIY Carpet Fixes Every Homeowner Should Know

3 DIY Carpet Fixes Every Homeowner Should Know

Carpets are easy to maintain when you know the proper treatment and fixes. If not, you will end up spending more on repairs and maintenance over the years. The carpet is one of the largest investments that can burn a hole in your wallet when you accidentally burn a spot on the rug or spill a glass of wine. But you don’t have to hire a professional to fix the spots to replace the carpet. Learning how to solve such issues will not only prolong the lifespan of the carpet, but all save you money.

As a homeowner, you can save money just by fixing common carpet problems on your own. With issues like loose spots, burns, and stains – we will help guide you through it. In this article, we will show you how to fix three of the most common carpet problems.

Here are 3 DIY carpet fixes every homeowner should know.

Re-patch Damaged Spots

Image source: www.hertscarpets.com

You can fix a small tear or hole by using techniques that will make the damage invisible. All you will need if a small spot of carpet that matches the area. If you are unable to find a matching material, you can always take some from inside the closet. While tearing up another area of carpet might sound extreme, it will be a whole lot cheaper than replacing the entire carpet floor. Be sure to get a carpet knife that has sharp, replaceable blades. You will also need a roll of one-sided carpet tape that will reinforce with the mesh.

Soggy Carpet Pads

Image source: www.bbc.co.uk

When the carpet gets soaked, you will need to act fast. The longer the carpet stays wet, the more it will stretch out and even begin to mold. If the large portion of the carpet is wet, consider a replacement. However, if there is only a small area that is soaked, you can tear out the soggy pad. Do so by grabbing the carpet with pliers and pull the carpet off the strip. Get rid of the soggy pad and replace it with a new one.

Fix Pulled-out Carpets

Image source: www.dallascarpetrepair.com

Did the carpet get loose from the metal threshold? You can fix it yourself within minutes. However, if the damage reaches over an inch, the repair won’t look as great as it once was. All you will need as a new metal threshold, carpet knife and a knee kicker, which can be found at a rental center.

The repair is will be easier if you remove the door first. You can do this when the door is in place, but risk the chances of scratching the door. Be sure to pry up the lip of the metal threshold with the use of a screwdriver or a flat pry bar. Once the carpet edge is in good shape, you will then be able to place the new metal threshold where the previous one was.

So, the next time you find yourself in a carpet situation, be sure to follow these 3 DIY carpet fixes.

4 Strategies to Keeping Your Carpets Fresh and Clean

4 Strategies to Keeping Your Carpets Fresh and Clean

Keeping your carpets well maintained and cleaned isn’t always easy but it will keep prolonging the life span twice as long. With a few simple strategies, you will learn how to effectively keep your carpet looking great for the years to come.

Here are four strategies to keeping your carpets fresh and clean.

Strategy #1: Get Rid of Dirt

Dirt is the number one cause of dirty carpets. When the dirt gets into the fibers, it will dull the sheen and reduce the attractive appearance. To help protect your carpet, be sure to vacuum on a weekly basis. For high-traffic areas, aim to vacuum twice a week. Be sure to set the vacuum at an ideal setting to prevent any damage. If the vacuum is set too high, you won’t grab any dirt.

A dirty bag will cut the suction of the vacuum in half. One reason why bag-less vacuums end up not working is that the filters are not changed enough. Once you see that the bags are almost three-quarters full; then it will be time to replace them.

Strategy #2: Use a Professional Cleaner

Most carpet cleaners are referred to as the steam cleaning. However, there is no steam involved in the process. The carpet is first applied with a detergent solution then followed with a hot rinse under high pressure. When the process is done properly, it will deep clean the carpet and prolong the lifespan. While you can always hire a carpet professional, you always have the option to rent a carpet-cleaning machine and remove the dirty.

If you choose to hire a professional, be sure to look for references, inspections, and a written estimate based on your home. It is important to be cautious about the discount cleaners as they will usually spray soap on the carpet and suck up the water. These types of services will leave a soapy residue behind and even up causing dirtier and mold to your carpet.

Strategy #3: DIY Clean

Carpet professionals will do a better job than most owners. However, they will also cost double the price. You can DIY clean the carpets yourself by renting a steam cleaner from the home center or grocery store. Be sure to also purchase the detergent cost and follow the directions accordingly. The best time to clean the carpets it when the color starts to look dull. Waiting until the carpet is filthy will require more work and even take longer than you would expect.

Strategy #4: Clean Stains Immediately

If you find yourself with a major spill, it is vital that you clean the stain up immediately. The longer the stain sits on the carpet, the harder it will be to remove. Try using plain tap water. You can simply press a dry cloth over the stain to absorb the spill. For tough spots, you can try baking soda or vinegar. Try a vinegar and water solution to clean the area and be patient.

What strategies do you have to keep your carpets looking great? Comment below and let us know!

5 Secrets to Keeping Your Carpets Looking Brand New

5 Secrets to Keeping Your Carpets Looking Brand New

Even with your best efforts to keep your carpets clean and spotless, they are always prone to sudden spills, drops, and dirt. While most care tips are easy to follow, we’ve got the best-kept secrets from the pros.

Here are 5 secrets to keeping your carpets looking brand new.

Blot, Not Rub

When it comes to cleaning stains on a carpet, the best thing to do is to blot the stains with a cleaning solution and cloth. Blotting will put less pressure on the stain, but enough to soak it up. Rubbing on the carpet will cause the particles to spread through the fibers and lead to premature damage. Start by blotting from the outer areas and move your way inward.

Use Shaving Cream

Believe it or not, regular shaving cream will remove nearly every type of stain. Apply the cream to the stain and let it set for thirty minutes. Once the shaving cream sets, you can blot it away with a dry white cloth. Spray the area with an equal water and vinegar solution and wipe the solution away to finish.

Heat Wax Drippings

Did your candle result in a sudden wax drip over the carpet? The best way to remove it is to heat it up by placing a white towel over the iron. Let the iron warm up the wax and scrape it off with a butter knife. Grab a paper towel and lay it over the surface. This will allow the wax to melt without spreading further.

Steam Clean Twice a Year

Cleaning the carpet is vital to keeping it fresh and new. Steam cleaning will use a cleaning solution under pressure to deep clean through nozzles. The steam cleaning machine will extract the solution and grab the dirty as well. The water mix will penetrate the fiber and loosen the embedded soil.

Use Organic Products for Pet Accidents

Even the most highly-trained pets will have an accident. With that said, opt for organic cleans rather than toxic chemicals. Spray the cleaner directly onto the stain and wipe up the solution with a towel or cloth. Using eco-friendly spot removers will not only remove pet accidents, but also wine stains, sauces, and coffee.

Got any tips on keeping your carpets fresh that you would like to share with us? Comment below and let us know!

How to Choose the Right Carpet for Your Home

How to Choose the Right Carpet for Your Home

Looking to add carpet to your home or simply replace it? To get the best out of your decisions, you must learn about the various styles, quality, and materials to choose from. Not only is this important in your decision but also determine the costs of maintenance over time.

Here’s how to choose the right carpet for your home.

Compare Options

Shopping for a carpet is just like shopping for any home renovation or large purchase. It takes a large financial investment, especially when you plan to add carpet to more than one area in your home. Make sure to grab inspiration and compare your options.

Consider the Carpet Fibers

There are four common fibers that are used in most carpets today. Nylon is known to outperform all other fibers due to its resilience, durability, and easy maintenance. If you want your carpet to last longer than a decade, be sure to choose quality fibers like nylon.

Other choices include Triexta, polyester, olefin. Triexta is a new fiber that comes from corn sugar. It has anti-stain properties and great for areas with high traffic. The Polyester fiber is also a stain resistance material that is both luxurious and soft. For an inexpensive choice, olefin has a strong fiber that resists fades.

Look for Quality Carpet

Consider the density of the fiber. The general range is from 20 to 80 as the higher the number, the tougher the carpet. Alwaysopt for a 10-year warranty as this will cover the texture retention and damage. Keep in mind for manufacturers who boast of their 25-year warranties as they don’t always honor damage, except for defects.

Get the Best Deal have each carpet option estimated to help you compare deals. Make sure not to discuss details about other bids you have received as each carpet will include a flooring diagram and quote for each aspect of the job.

Conclusion

Determine the quality of the carpet by choosing the density of the pad. The right pad will help prolong the lifespan and reduce the maintenance experience in the long run.