3 DIY Carpet Fixes Every Homeowner Should Know

3 DIY Carpet Fixes Every Homeowner Should Know

Carpets are easy to maintain when you know the proper treatment and fixes. If not, you will end up spending more on repairs and maintenance over the years. The carpet is one of the largest investments that can burn a hole in your wallet when you accidentally burn a spot on the rug or spill a glass of wine. But you don’t have to hire a professional to fix the spots to replace the carpet. Learning how to solve such issues will not only prolong the lifespan of the carpet, but all save you money.

As a homeowner, you can save money just by fixing common carpet problems on your own. With issues like loose spots, burns, and stains – we will help guide you through it. In this article, we will show you how to fix three of the most common carpet problems.

Here are 3 DIY carpet fixes every homeowner should know.

Re-patch Damaged Spots

Image source: www.hertscarpets.com

You can fix a small tear or hole by using techniques that will make the damage invisible. All you will need if a small spot of carpet that matches the area. If you are unable to find a matching material, you can always take some from inside the closet. While tearing up another area of carpet might sound extreme, it will be a whole lot cheaper than replacing the entire carpet floor. Be sure to get a carpet knife that has sharp, replaceable blades. You will also need a roll of one-sided carpet tape that will reinforce with the mesh.

Soggy Carpet Pads

Image source: www.bbc.co.uk

When the carpet gets soaked, you will need to act fast. The longer the carpet stays wet, the more it will stretch out and even begin to mold. If the large portion of the carpet is wet, consider a replacement. However, if there is only a small area that is soaked, you can tear out the soggy pad. Do so by grabbing the carpet with pliers and pull the carpet off the strip. Get rid of the soggy pad and replace it with a new one.

Fix Pulled-out Carpets

Image source: www.dallascarpetrepair.com

Did the carpet get loose from the metal threshold? You can fix it yourself within minutes. However, if the damage reaches over an inch, the repair won’t look as great as it once was. All you will need as a new metal threshold, carpet knife and a knee kicker, which can be found at a rental center.

The repair is will be easier if you remove the door first. You can do this when the door is in place, but risk the chances of scratching the door. Be sure to pry up the lip of the metal threshold with the use of a screwdriver or a flat pry bar. Once the carpet edge is in good shape, you will then be able to place the new metal threshold where the previous one was.

So, the next time you find yourself in a carpet situation, be sure to follow these 3 DIY carpet fixes.

4 Strategies to Keeping Your Carpets Fresh and Clean

4 Strategies to Keeping Your Carpets Fresh and Clean

Keeping your carpets well maintained and cleaned isn’t always easy but it will keep prolonging the life span twice as long. With a few simple strategies, you will learn how to effectively keep your carpet looking great for the years to come.

Here are four strategies to keeping your carpets fresh and clean.

Strategy #1: Get Rid of Dirt

Dirt is the number one cause of dirty carpets. When the dirt gets into the fibers, it will dull the sheen and reduce the attractive appearance. To help protect your carpet, be sure to vacuum on a weekly basis. For high-traffic areas, aim to vacuum twice a week. Be sure to set the vacuum at an ideal setting to prevent any damage. If the vacuum is set too high, you won’t grab any dirt.

A dirty bag will cut the suction of the vacuum in half. One reason why bag-less vacuums end up not working is that the filters are not changed enough. Once you see that the bags are almost three-quarters full; then it will be time to replace them.

Strategy #2: Use a Professional Cleaner

Most carpet cleaners are referred to as the steam cleaning. However, there is no steam involved in the process. The carpet is first applied with a detergent solution then followed with a hot rinse under high pressure. When the process is done properly, it will deep clean the carpet and prolong the lifespan. While you can always hire a carpet professional, you always have the option to rent a carpet-cleaning machine and remove the dirty.

If you choose to hire a professional, be sure to look for references, inspections, and a written estimate based on your home. It is important to be cautious about the discount cleaners as they will usually spray soap on the carpet and suck up the water. These types of services will leave a soapy residue behind and even up causing dirtier and mold to your carpet.

Strategy #3: DIY Clean

Carpet professionals will do a better job than most owners. However, they will also cost double the price. You can DIY clean the carpets yourself by renting a steam cleaner from the home center or grocery store. Be sure to also purchase the detergent cost and follow the directions accordingly. The best time to clean the carpets it when the color starts to look dull. Waiting until the carpet is filthy will require more work and even take longer than you would expect.

Strategy #4: Clean Stains Immediately

If you find yourself with a major spill, it is vital that you clean the stain up immediately. The longer the stain sits on the carpet, the harder it will be to remove. Try using plain tap water. You can simply press a dry cloth over the stain to absorb the spill. For tough spots, you can try baking soda or vinegar. Try a vinegar and water solution to clean the area and be patient.

What strategies do you have to keep your carpets looking great? Comment below and let us know!

5 Secrets to Keeping Your Carpets Looking Brand New

5 Secrets to Keeping Your Carpets Looking Brand New

Even with your best efforts to keep your carpets clean and spotless, they are always prone to sudden spills, drops, and dirt. While most care tips are easy to follow, we’ve got the best-kept secrets from the pros.

Here are 5 secrets to keeping your carpets looking brand new.

Blot, Not Rub

When it comes to cleaning stains on a carpet, the best thing to do is to blot the stains with a cleaning solution and cloth. Blotting will put less pressure on the stain, but enough to soak it up. Rubbing on the carpet will cause the particles to spread through the fibers and lead to premature damage. Start by blotting from the outer areas and move your way inward.

Use Shaving Cream

Believe it or not, regular shaving cream will remove nearly every type of stain. Apply the cream to the stain and let it set for thirty minutes. Once the shaving cream sets, you can blot it away with a dry white cloth. Spray the area with an equal water and vinegar solution and wipe the solution away to finish.

Heat Wax Drippings

Did your candle result in a sudden wax drip over the carpet? The best way to remove it is to heat it up by placing a white towel over the iron. Let the iron warm up the wax and scrape it off with a butter knife. Grab a paper towel and lay it over the surface. This will allow the wax to melt without spreading further.

Steam Clean Twice a Year

Cleaning the carpet is vital to keeping it fresh and new. Steam cleaning will use a cleaning solution under pressure to deep clean through nozzles. The steam cleaning machine will extract the solution and grab the dirty as well. The water mix will penetrate the fiber and loosen the embedded soil.

Use Organic Products for Pet Accidents

Even the most highly-trained pets will have an accident. With that said, opt for organic cleans rather than toxic chemicals. Spray the cleaner directly onto the stain and wipe up the solution with a towel or cloth. Using eco-friendly spot removers will not only remove pet accidents, but also wine stains, sauces, and coffee.

Got any tips on keeping your carpets fresh that you would like to share with us? Comment below and let us know!

How to Choose the Right Carpet for Your Home

How to Choose the Right Carpet for Your Home

Looking to add carpet to your home or simply replace it? To get the best out of your decisions, you must learn about the various styles, quality, and materials to choose from. Not only is this important in your decision but also determine the costs of maintenance over time.

Here’s how to choose the right carpet for your home.

Compare Options

Shopping for a carpet is just like shopping for any home renovation or large purchase. It takes a large financial investment, especially when you plan to add carpet to more than one area in your home. Make sure to grab inspiration and compare your options.

Consider the Carpet Fibers

There are four common fibers that are used in most carpets today. Nylon is known to outperform all other fibers due to its resilience, durability, and easy maintenance. If you want your carpet to last longer than a decade, be sure to choose quality fibers like nylon.

Other choices include Triexta, polyester, olefin. Triexta is a new fiber that comes from corn sugar. It has anti-stain properties and great for areas with high traffic. The Polyester fiber is also a stain resistance material that is both luxurious and soft. For an inexpensive choice, olefin has a strong fiber that resists fades.

Look for Quality Carpet

Consider the density of the fiber. The general range is from 20 to 80 as the higher the number, the tougher the carpet. Alwaysopt for a 10-year warranty as this will cover the texture retention and damage. Keep in mind for manufacturers who boast of their 25-year warranties as they don’t always honor damage, except for defects.

Get the Best Deal have each carpet option estimated to help you compare deals. Make sure not to discuss details about other bids you have received as each carpet will include a flooring diagram and quote for each aspect of the job.


Determine the quality of the carpet by choosing the density of the pad. The right pad will help prolong the lifespan and reduce the maintenance experience in the long run.